|
AMD Phenom II Triple-Core Mobile P840 - HMP840SGR32GM
Specifications
Tools
AMD Phenom II P840 specifications
| General information |
| Type | CPU / Microprocessor |
| Market segment | Mobile |
| Family | AMD Phenom II Triple-Core Mobile |
| Model number ? | P840 |
| CPU part number | HMP840SGR32GM is an OEM/tray microprocessor |
| Stepping code | NADHC AD |
| Frequency ? | 1900 MHz |
| Bus speed ? | One 1800 MHz 16-bit HyperTransport link |
| Clock multiplier ? | 9.5 |
| Package | 638-pin micro-PGA |
| AMD Package number | 30605 |
| Socket | Socket S1 (S1g4) |
| Size | 1.38" x 1.38" / 3.5cm x 3.5cm |
| Introduction date | September - October 2010 |
| | | Architecture / Microarchitecture |
| Microarchitecture | K10 |
| Platform | Danube |
| Processor core ? | Champlain |
| Manufacturing process | 0.045 micron SOI |
| Data width | 64 bit |
| The number of cores | 3 |
| The number of threads | 3 |
| Floating Point Unit | Integrated |
| Level 1 cache size ? | 3 x 64 KB instruction caches
3 x 64 KB data caches |
| Level 2 cache size ? | 3 x 512 KB |
| Level 3 cache size | None |
| Multiprocessing | Uniprocessor |
| Features | - MMX instructions
- 3DNow! technology
- SSE / Streaming SIMD Extensions
- SSE2 / Streaming SIMD Extensions 2
- SSE3 / Streaming SIMD Extensions 3
- SSE4a ?
- AMD64 / AMD 64-bit technology ?
- EVP / Enhanced Virus Protection ?
- VT / Virtualization technology ?
|
| Low power features | PowerNow! |
| On-chip peripherals | - Integrated DDR3 SDRAM memory controller
- HyperTransport technology 3.0
|
| | | Electrical / Thermal parameters |
| Thermal Design Power ? | 25 Watt |
| |
| Notes on AMD HMP840SGR32GM |
- The fastest supported memory is DDR3-1066
|
CPUs, related to AMD Phenom II P840
• Highlighted numbers and features indicate whether specific processor performs better or worse than Phenom II P840
• Within each category, the CPUs are sorted from slower (at the top) to faster (at the bottom)
• List of related CPUs is not complete.
• Features abbreviations:
Unlock - Unlocked multiplier
FAQ
Q: I have an AMD Phenom II P840 CPU. Is it possible to upgrade it?
A: Probably yes. Processor compatibility is determined by your motherboard. Please check CPU-Upgrade.com website for CPU support list for your board.
AMD P840 Overclocking
Sorry, overclocking information is not available at this time.
News
Notebooks with new AMD Phenom II CPUs (roundup)
Oct 13, 2010: It's been two weeks since brief specifications of new mobile Athlon
microprocessors emerged on AMD website. In the past, we published a
few articles describing characteristics of these microprocessors,
along with details on notebook PCs, where the processors will be used.
As a follow up to those articles, we decided to publish a list of
currently available laptops with the new AMD mobile CPUs.
AMD publishes specifications of new mobile CPUs
Sep 30, 2010: At the end of July, and then again at the end of August, we
discovered 10 upcoming AMD mobile microprocessors from Danube platform
in specifications of HP ProBook 6455b / 6555b and HP Pavilion dv6
notebooks. Days ago, AMD added characteristics of all but one of these
microprocessors to "The 2010 AMD Mainstream Platform" page.
The Danube platform page includes 9 new models, comprising of
power-efficient and standard-power microprocessors from single-core
V140 to quad-core P940 and N950. We don't know yet whether this is a
preparation step for upcoming launch, or an indication that the
microprocessors are already launched. Even if the processors are not
officially released yet, all of them are already shipped in numerous
notebooks.
More future mobile AMD CPUs uncovered
Aug 25, 2010: In the course of past 4 weeks, we published two articles about
the second wave of AMD mobile microprocessors for Danube platform. So
far we discovered quad-core Phenom II N950, triple-core Phenom II
N850, and dual-core Phenom II Mobile N640, Turion II P540 and Athlon
II P340 microprocessors. We also reported on upcoming single-core V
series V140. Not long ago Hewlett-Packard updated maintenance and
service guide for HP Pavilion dv6 notebook, and added a few not-yet
launched models - Phenom II X4 P940, Phenom II X3 P840, Turion II X2
N550 and Athlon II N350.
CPU ID (1)
CPUID Tools
CPUID features of AMD P840
NOTE: The CPU ID information below was taken from one CPU and
may include features that are not present in all different steppings of the
AMD Phenom II Triple-Core Mobile P840 CPU.
| Manufacturer: | AMD |
| CPU Family: | Phenom II Triple-Core Mobile |
| Model Number: | P840 |
| Frequency: | 1895 MHz |
|
| Part number: | HMP840SGR32GM |
| Stepping Code: | |
| Comment: | CPU in an HP C62-365CA |
| Submitted by: | MaXStaR |
|
| General information |
| Vendor: | AuthenticAMD |
| Processor name (BIOS): | AMD Phenom(tm) II P840 Triple-Core Processor |
| Cores: | 3 |
| Logical processors: | 3 |
| Processor type: | Original OEM Processor |
| Core stepping: | BL-C3 |
| CPUID signature: | 100F53 |
| Family: | 16 (010h) |
| Model: | 5 (05h) |
| Stepping: | 3 (03h) |
| Cache: |
L1 data |
L1 instruction |
L2 |
| Size: |
3 x 64 KB |
3 x 64 KB |
3 x 512 KB |
| Associativity: |
2-way set associative |
2-way set associative |
16-way set associative |
| Line size: |
64 bytes |
64 bytes |
64 bytes |
| Lines per tag: |
1 |
1 |
1 |
| |
| Instruction set extensions | Additional instructions |
| MMX |
Advanced Bit manipulation |
| AMD extensions to MMX |
CLFLUSH |
| 3DNow! |
CMOV |
| Extensions to 3DNow! |
CMPXCHG16B |
| SSE |
CMPXCHG8B |
| SSE2 |
FXSAVE/FXRSTORE |
| SSE3 |
MONITOR/MWAIT |
| SSE4A |
POPCNT |
| |
PREFETCH/PREFETCHW |
| |
RDTSCP |
| |
SKINIT / STGI support |
| |
SYSCALL/SYSRET |
| |
SYSENTER/SYSEXIT |
| |
| Major features | Other features |
| On-chip Floating Point Unit |
1 GB large page support |
| 64-bit / Intel 64 |
100MHz multiplier control |
| NX bit/XD-bit |
128-bit SSE instructions |
| Secure Virtual Machine (Virtualization) |
36-bit page-size extensions |
| PowerNow! / Cool'n'Quiet |
Advanced programmable interrupt controller |
| |
Core multi-processing legacy mode |
| |
Debugging extensions |
| |
Extended APIC space |
| |
Hardware P-state control |
| |
Hardware thermal control |
| |
Instruction based sampling |
| |
LAHF / SAHF support in 64-bit mode |
| |
LBR virtualization |
| |
LOCK MOV CR0 means MOV CR8 |
| |
Machine check architecture |
| |
Machine check exception |
| |
Memory-type range registers |
| |
Misaligned SSE mode |
| |
Model-specific registers |
| |
Nested page tables |
| |
OS visible workaround |
| |
Page attribute table |
| |
Page global extension |
| |
Page-size extensions (4MB pages) |
| |
Physical address extensions |
| |
SVM lock |
| |
Software thermal control |
| |
Support for NRIP save |
| |
THERMTRIP |
| |
TSC rate is ensured to be invariant across all states |
| |
Temperature sensor |
| |
Time stamp counter |
| |
Virtual 8086-mode enhancements |
| |
Watchdog timer support |
Comments (0)
You're welcome to post suggestions, corrections, your own personal
AMD Phenom II P840 review, or your experience with the microprocessor.
Please do not ask upgrade and troubleshooting questions, and do not start
discussions.
|
Find CPUs
Find Phenom II Triple-Core Mobile CPUs with:
|