Specifications
| General information |
| Type | CPU / Microprocessor |
| Market segment | Desktop |
| Family | AMD Phenom II X6 |
| Model number ? | 1045T |
| CPU part numbers | HDT45TWFK6DGR is an OEM/tray microprocessor HDT45TWFGRBOX is a boxed microprocessor |
| Stepping codes | ACBBE CB CCBBE CB |
| Frequency ? | 2700 MHz |
| Turbo frequency | 3200 MHz (3 cores or less) |
| Bus speed ? | 667 MHz Memory controller
One 2000 MHz 16-bit HyperTransport link |
| Clock multiplier ? | 13.5 |
| Package | 938-pin organic micro-PGA |
| Socket | Socket AM3 |
| Weight | 1.4oz / 38.3g |
| Introduction date | August - September, 2010 |
| |
| Architecture / Microarchitecture |
| Microarchitecture | K10 |
| Platform | Leo |
| Processor core ? | Thuban |
| Core stepping ? | PH-E0 |
| CPUID | 100FA0 |
| Manufacturing process | 0.045 micron SOI |
| Die size | 346mm2 |
| Data width | 64 bit |
| The number of cores | 6 |
| The number of threads | 6 |
| Floating Point Unit | Integrated |
| Level 1 cache size ? | 6 x 64 KB instruction caches
6 x 64 KB data caches |
| Level 2 cache size ? | 6 x 512 KB caches |
| Level 3 cache size | 6 MB shared cache |
| Cache latency | 3 (L1 cache)
13 (L2 cache)
47 (L3 cache) |
| Multiprocessing | Uniprocessor |
| Features | - MMX
- 3DNow!
- SSE
- SSE2
- SSE3
- SSE4a ?
- Advanced Bit Manipulation ?
- AMD64 technology ?
- AMD-V (virtualization) technology
- Enhanced Virus Protection ?
- Turbo Core technology
|
| Low power features | Cool'n'Quiet 3.0 |
| On-chip peripherals | - Integrated DDR2/DDR3 Memory Controller
- HyperTransport 3.x technology
|
| |
| Electrical/Thermal parameters |
| V core ? | 1.075V - 1.375V (at rated frequency)
1.225V - 1.425V (Turbo Core mode)
0.975V - 1.175V (Minimum performance state) |
| V NorthBridge | 1.05V - 1.175V |
| Maximum operating temperature ? | 55°C - 71°C |
| Thermal Design Power ? | 95 Watt |
| |
| Notes on AMD HDT45TWFK6DGR |
- On socket AM2+/AM3 platforms in the minimum performance state the processor runs at 800 MHz core voltage and has TDP 47.1 Watt
|
CPUs, related to AMD Phenom II X6 1045T
• Highlighted numbers and features indicate whether specific processor performs better or worse than Phenom II X6 1045T
• Within each category, the CPUs are sorted from slower (at the top) to faster (at the bottom)
• Features abbreviations:
Unlock - Unlocked multiplier
News
Sep 25, 2010: Earlier this month we stumbled upon specifications of two HP computers
with unreleased Phenom II 1045T microprocessor. These findings were published on September 11 on our site. Today, we learned that two other HP
computers with the same processor are sold on Hewlett-Packard website.
Sep 11, 2010: New version of AMD six-core microprocessor with model number 1045T
appeared recently in specifications of two Hewlett Packard desktop PCs
aimed at US market - HP Pavilion Elite HPE-410y and HP Pavilion Elite
HPE-447c. According to the specifications, the HPE-410y PC was
introduced in August 2010, and it will be sold in United States. The
HPE-447c desktop computer was introduced on August 25th, and it will be
offered in US and Canada.
Aug 20, 2010: Biostar updated CPU support information on their website, adding
hexa-core Phenom II 1045T, which, according to Fudzilla,
will be launched in this quarter. Biostar also listed three future
Athlon II microprocessors - dual-core 270, triple-core 455, and
quad-core 650.
CPU ID (1)
NOTE: CPU ID information below was taken from one CPU and
may include features that are not present in all different steppings of the
AMD Phenom II X6 1045T CPU.
| Manufacturer: | AMD |
| CPU Family: | Phenom II X6 |
| Model Number: | 1045T |
| Frequency: | 2694 MHz |
|
| Part number: | HDT45TWFK6DGR |
| Stepping Code: | CCBBE CB 1028APMW |
| Comment: | |
| Submitted by: | CPU-World |
|
| General information |
| Vendor: | AuthenticAMD |
| Processor name (BIOS): | AMD Phenom(tm) II X6 1045T Processor |
| Processor name (CWID): | Phenom II(tm) X6 1045T |
| Cores: | 6 |
| Logical processors: | 6 |
| Processor type: | Original OEM Processor |
| Core stepping: | PH-E0 |
| CPUID signature: | 100FA0 |
| Family: | 16 (010h) |
| Model: | 10 (0Ah) |
| Stepping: | 0 (00h) |
| Cache: |
L1 data |
L1 instruction |
L2 |
L3 |
| Size: |
6 x 64 KB |
6 x 64 KB |
6 x 512 KB |
6 MB |
| Associativity: |
2-way set associative |
2-way set associative |
16-way set associative |
48-way set associative |
| Line size: |
64 bytes |
64 bytes |
64 bytes |
64 bytes |
| Lines per tag: |
1 |
1 |
1 |
1 |
| |
| Instruction set extensions | Additional instructions |
| MMX |
Advanced Bit manipulation |
| AMD extensions to MMX |
CLFLUSH |
| 3DNow! |
CMOV |
| Extensions to 3DNow! |
CMPXCHG16B |
| SSE |
CMPXCHG8B |
| SSE2 |
FXSAVE/FXRSTORE |
| SSE3 |
MONITOR/MWAIT |
| SSE4A |
POPCNT |
| |
PREFETCH/PREFETCHW |
| |
SYSCALL/SYSRET |
| |
SYSENTER/SYSEXIT |
| |
| Major features | Other features |
| On-chip Floating Point Unit |
1 GB large page support |
| 64-bit / Intel 64 |
100MHz multiplier control |
| NX bit/XD-bit |
128-bit SSE instructions |
| Secure Virtual Machine (Virtualization) |
36-bit page-size extensions |
| Turbo Core |
Advanced programmable interrupt controller |
| PowerNow! / Cool'n'Quiet |
Core multi-processing legacy mode |
| |
Debugging extensions |
| |
Extended APIC space |
| |
Hardware P-state control |
| |
Hardware thermal control |
| |
Instruction based sampling |
| |
LAHF/SAHF support in 64-bit mode |
| |
LBR virtualization |
| |
LOCK MOV CR0 means MOV CR8 |
| |
Machine check architecture |
| |
Machine check exception |
| |
Memory-type range registers |
| |
Misaligned SSE mode |
| |
Model-specific registers |
| |
Nested page tables |
| |
OS visible workaround |
| |
Page attribute table |
| |
Page global extension |
| |
Page-size extensions (4MB pages) |
| |
Physical address extensions |
| |
RDTSCP |
| |
SKINIT and STGI support |
| |
SVM lock |
| |
Software thermal control |
| |
Support for NRIP save |
| |
THERMTRIP |
| |
TSC rate is ensured to be invariant across all states |
| |
Temperature sensor |
| |
Time stamp counter |
| |
Virtual 8086-mode enhancements |
| |
Watchdog timer support |