|
Support/peripheral/other chips starting from 80
| Z8010 |
Memory management unit |
| Comment: | Provides dynamic memory access relocation. Maps 64 segments ranging from 256 bytes to 64 KB into 16 MB address space.
Includes memory protection features.
Used with Z8001 and Z8003 processors.
Z8010 is a 4 MHz part.
Z8010A is a 6 MHz part.
Z8010B is a 10 MHz part. |
| Packages: | 48-pin DIP, 68-pin CLCC |
| Manufacturers: | SGS, Zilog |
| SGS | Z8010B1, Z8010B6, Z8010D1, Z8010D2, Z8010D6, Z8010AB1, Z8010AB6, Z8010AD1, Z8010AD2, Z8010AD6, Z8010BB1, Z8010BB6, Z8010BD1, Z8010BD2, Z8010BD6 |
| Zilog | Z8010 PS (Z8010PS), Z8010 CS (Z8010CS), Z8010 CE (Z8010CE), Z8010 LL (Z8010LL), Z8010A PS (Z8010APS), Z8010A CS (Z8010ACS), Z8010A LL (Z8010ALL), Z8010B PS (Z8010BPS), Z8010B CS (Z8010BCS), Z8010B LL (Z8010BLL) | | |
| Z8015 |
Paged memory management unit |
| Comment: | Supports paged virtual memory system for Z8003 processors. Maps 64 2 KB pages into 16 MB address space.
Z8015 is a 4 MHz part.
Z8015A is a 6 MHz part. |
| Packages: | 64-pin DIP, 68-pin PLCC |
| Manufacturers: | SGS, Zilog |
| SGS | Z8015D1 |
| Zilog | Z8015 CS (Z8015CS), Z8015 CE (Z8015CE), Z8015 VS (Z8015VS), Z8015 VE (Z8015VE), Z8015A CS (Z8015ACS), Z8015A CE (Z8015ACE), Z8015A VS (Z8015AVS), Z8015A VE (Z8015AVE) | | |
| Z8016 |
DMA transfer controller |
| Comment: | 2 independent channels.
Can work with memory management units.
Z8016 is a 4 MHz part.
Z8016A is a 6 MHz part. |
| Package: | 48-pin DIP |
| Manufacturers: | Zilog |
| Zilog | Z8016 PS (Z8016PS), Z8016 CS (Z8016CS), Z8016 PE (Z8016PE), Z8016 CE (Z8016CE), Z8016A PS (Z8016APS), Z8016A CS (Z8016ACS), Z8016A PE (Z8016APE), Z8016A CE (Z8016ACE) | | |
| Z8030 |
Serial communications controller |
| Comment: | 2 full-duplex independent channels up to 1.5 Mbit/second each.
Z8030 is a 4 MHz part.
Z8030A is a 6 MHz part.
Z8030A SL441 is a 6.5 MHZ T1-compatible part. |
| Packages: | 40-pin DIP, 44-pin CLCC, 44-pin PLCC |
| Manufacturers: | SGS, Zilog |
| SGS | Z8030B1, Z8030B6, Z8030D1, Z8030D6, Z8030AB1, Z8030AB6, Z8030AD1, Z8030AD6 |
| Zilog | Z8030 PS (Z8030PS), Z8030 CS (Z8030CS), Z8030 PE (Z8030PE), Z8030 CE (Z8030CE), Z8030 CM (Z8030CM), Z8030 CMB (Z8030CMB), Z8030 LM (Z8030LM), Z8030 LMB (Z8030LMB), Z8030 VS (Z8030VS), Z8030A PS (Z8030APS), Z8030A CS (Z8030ACS), Z8030A PE (Z8030APE), Z8030A CE (Z8030ACE), Z8030A CM (Z8030ACM), Z8030A CMB (Z8030ACMB), Z8030A LM (Z8030ALM), Z8030A LMB (Z8030ALMB), Z8030A VS (Z8030AVS), Z8030A PS SL441 (Z8030APSSL441), Z8030A CS SL441 (Z8030ACSSL441), Z8030A VS SL441 (Z8030AVSSL441) | | |
| Z8031 |
Asynchronous serial communications controller |
| Comment: | 2 full-duplex independent channels up to 1 Mbit/second each.
Z8031 is a 4 MHz part.
Z8031A is a 6 MHz part. |
| Packages: | 40-pin DIP, 44-pin PLCC |
| Manufacturers: | SGS, Zilog |
| SGS | Z8031B1, Z8031B6, Z8031D1, Z8031D6, Z8031AB1, Z8031AB6, Z8031AD1, Z8031AD6 |
| Zilog | Z8031 PS (Z8031PS), Z8031 CS (Z8031CS), Z8031 VS (Z8031VS), Z8031A PS (Z8031APS), Z8031A CS (Z8031ACS), Z8031A VS (Z8031AVS) | | |
| Z8036 |
Counter/timer and parallel I/O unit |
| Comment: | 2 independent 8-bit bidirectional I/O ports.
1 4-bit special-purpose I/O port.
3 16-bit counters/timers.
Z8036 is a 4 MHz part.
Z8036A is a 6 MHz part. |
| Packages: | 40-pin DIP, 44-pin CLCC, 44-pin PLCC |
| Manufacturers: | SGS, Zilog |
| SGS | Z8036B1, Z8036B6, Z8036D1, Z8036D6, Z8036AB1, Z8036AB6, Z8036AD1, Z8036AD6 |
| Zilog | Z8036 PS (Z8036PS), Z8036 CS (Z8036CS), Z8036 PE (Z8036PE), Z8036 CE (Z8036CE), Z8036 CM (Z8036CM), Z8036 CMB (Z8036CMB), Z8036 LM (Z8036LM), Z8036 LMB (Z8036LMB), Z8036 VS (Z8036VS), Z8036A PS (Z8036APS), Z8036A CS (Z8036ACS), Z8036A PE (Z8036APE), Z8036A CE (Z8036ACE), Z8036A CM (Z8036ACM), Z8036A CMB (Z8036ACMB), Z8036A LM (Z8036ALM), Z8036A LMB (Z8036ALMB), Z8036A VS (Z8036AVS) | | |
| Z8038 |
FIFO Input/Output interface unit |
| Comment: | 128 byte FIFO buffer used between 2 CPUs, or between a CPU and a peripheral device.
Expandable to any width using multiple chips.
Z8038 is a 4 MHz part.
Z8038A is a 6 MHz part. |
| Packages: | 40-pin DIP, 44-pin CLCC |
| Manufacturers: | SGS, Zilog |
| SGS | Z8038B1, Z8038B6, Z8038D1, Z8038D6, Z8038AB1, Z8038AB6, Z8038AD1, Z8038AD6 |
| Zilog | Z8038 PS (Z8038PS), Z8038 CS (Z8038CS), Z8038 PE (Z8038PE), Z8038 CE (Z8038CE), Z8038 CM (Z8038CM), Z8038 CMB (Z8038CMB), Z8038 LM (Z8038LM), Z8038 LMB (Z8038LMB), Z8038A PS (Z8038APS), Z8038A CS (Z8038ACS), Z8038A PE (Z8038APE), Z8038A CE (Z8038ACE), Z8038A CM (Z8038ACM), Z8038A CMB (Z8038ACMB), Z8038A LM (Z8038ALM), Z8038A LMB (Z8038ALMB) | | |
| Z8060 |
FIFO buffer unit and |
| Comment: | 128x8 bit buffer memory.
Can be expanded to any buffer size (in 128 byte increment) and any data width (in 8 byte increments).
Z8060 is a 4 MHz part.
Z8060A is a 6 MHz part. |
| Package: | 28-pin DIP |
| Manufacturers: | SGS, Zilog |
| SGS | Z8060B1, Z8060B6, Z8060D1, Z8060D6, Z8060AB1, Z8060AB6, Z8060AD1, Z8060AD6 |
| Zilog | Z8060 PS (Z8060PS), Z8060 CS (Z8060CS) | | |
| Z8068 |
Data ciphering processor |
| Comment: | Encrypts/decrypts data using National Bureau of Standards encryption algorithm.
3 standard ciphering modes: Electronic Code Book, Chain Block and Cipher Feedback. |
| Manufacturers: | Zilog |
| Zilog | Z8068 PS (Z8068PS), Z8068 CS (Z8068CS) | | |
| Z8090 |
Z-Bus and Z8 bus universal peripheral controller |
| Comment: | Slave Z8 microcontroller with 256-byte register file, 2 KB on-chip ROM, 3 programmable I/O ports and 2 programmable 8-bit counters/timers. |
| Package: | 40-pin DIP |
| Manufacturers: | Zilog |
| Zilog | Z8090 CS (Z8090CS), Z8090 PS (Z8090PS) | | |
| Z8094 |
Z-Bus and Z8 bus universal peripheral controller |
| Comment: | Slave Z8 microcontroller with 256-byte register file, 2 KB RAM or EPROM, 3 programmable I/O ports and 2 programmable 8-bit counters/timers. |
| Package: | 40-pin DIP |
| Manufacturers: | Zilog |
| Zilog | Z8094 RS (Z8094RS) | | |
|
|
