| |
| 8206 |
Error detection and correction unit |
| Comment: | 8206-2 is optimized for 8 MHz systems. |
| Package: | 68-pin CLCC |
| Manufacturers: | Intel |
| Intel | C8206, C8206-2, R8206, R8206-2 |
| |
| 8207 |
Dual-port dynamic RAM controller |
| Comment: | Controls 16 KB, 64 KB and 256 KB dynamic RAM chips.
8207-12 and 8207-16 (12 and 16 MHz parts respectively) can be used in 80286 systems.
8207-6 and 8207-8 (6 and 8 MHz parts respectively) can be used in 8086/8088/80186/80188 systems. |
| Package: | 68-pin CLCC |
| Manufacturers: | Intel |
| Intel | C8207, C8207-6, C8207-8, C8207-12, C8207-16, R8207, R8207-6, R8207-8, R8207-12, R8207-16 |
| |
| 8208 |
Dynamic RAM controller |
| Comment: | Controls 64 KB and 256 KB dynamic RAM chips. |
| Package: | 48-pin DIP |
| Manufacturers: | Intel |
| |
| 82C54 |
CHMOS programmable interval timer |
| Comment: | The chip has 3 16-bit programmable timers/counters.
8254 is an 8 MHz part.
8254-2 is a 10 MHz part. |
| Packages: | 24-pin DIP, 28-pin PLCC |
| Manufacturers: | Intel |
| |
| 82C55A |
CHMOS programmable peripheral interface. |
| Comment: | The chip has 24 programmable I/O pins. |
| Packages: | 40-pin DIP, 44-pin PLCC, 44-pin QFP |
| Manufacturers: | AMD, Intel, OKI, UMC |
| AMD | D82C55A, D82C55A-2, ID82C55A, ID82C55A-2, P82C55A, P82C55A-2 |
| OKI | MSM82C55A-5RS, MSM82C55A-5GS |
| UMC | UM82C55A |
| |
| 8256AH |
Multifunction microprocessor support controller |
| Comment: | Includes programmable serial asynchronous communications interface, 5 8-bit programmable timers/counter, 2 8-bit programmable parallel I/O ports, 8-level priority interrupt controller, programmable system clock. |
| Package: | 40-pin DIP |
| Manufacturers: | Intel |
| |
| SAB8256A |
Programmable multifunction UART |
| Comment: | Up to 19.2 K Baud with internal baud rate generator.
Interrupt controller with 8 priority levels.
5 programmable 8-bit timers/counters.
2 8-bit I/O ports.
SAB8256A support up to 3 MHz processors.
SAB8256A-2 supports up to 8 MHz processors. |
| Package: | 40-pin DIP |
| Manufacturers: | Siemens |
| Siemens | SAB8256A-C, SAB8256A-P, SAB8256A-2-C, SAB8256A-2-P |
| |
| 8273 |
Programmable HLDC/SLDC protocol controller |
| Comment: | CCITT X.25 and HDLC/SDLC compatible.
Up to 64 K Baud with 8273.
Up to 56 K Baud with 8273-4. |
| Package: | 40-pin DIP |
| Manufacturers: | Intel |
| Intel | D8273, P8273 |
| |
| 8274 |
Multi-protocol serial controller |
| Comment: | 4 DMA channels.
Two full-duplex transmitters and receivers.
Up to 880 K Baud. |
| Package: | 40-pin DIP |
| Manufacturers: | Intel |
| Intel | D8274, P8274 |
| |
| 8282 |
Octal latch with 3-state outputs |
| Package: | 20-pin DIP |
| Manufacturers: | Intel, NEC |
| Intel | D8282, P8282 |
| NEC | UPB8282C |
| |
| 8283 |
8-bit latch with 3-state outputs |
| Comment: | Inverts input data. |
| Package: | 20-pin DIP |
| Manufacturers: | Intel, NEC |
| Intel | D8283, P8283 |
| NEC | UPB8283C |
| |
| 8286 |
8-bit bus transeiver with 3-state outputs |
| Package: | 20-pin DIP |
| Manufacturers: | Intel, NEC |
| Intel | D8286, P8286 |
| NEC | UPB8286C |
| |
| 8287 |
8-bit bus transeiver with 3-state outputs |
| Comment: | Inverts input data. |
| Package: | 20-pin DIP |
| Manufacturers: | Intel, NEC |
| Intel | D8287, P8287 |
| NEC | UPB8287C |
| |
| 82C88 |
CHMOS bus controller |
| Comment: | Supports 80C86 and 80C88 processors.
Pin-compatible with 8288. |
| Packages: | 20-pin DIP, 24-pin flat package |
| Manufacturers: | Intel, OKI, UMC |
| OKI | MSM82C88AS, MSM82C88GS |
| UMC | UM82C88 |
| |
| 82064 |
Winchester disk controller with on-chip error detection and correction |
| Package: | 40-pin DIP |
| Manufacturers: | Intel |
| |
| 82188 |
Integrated bus controller |
| Comment: | Supports 8087 co-processor in 80186/80188 systems.
Provides interface to 82586 LAN co-processor and 82730 co-processor for 8086 and 8088 systems. |
| Package: | 28-pin DIP |
| Manufacturers: | Intel |
| Intel | P82188, D82188 |
| |
| 82258 |
Advanced 16-bit 4-channel DMA controller |
| Packages: | 68-pin PGA, 68-pin CLCC |
| Manufacturers: | Intel |
| |
| 82530 |
Serial communications controller |
| Comment: | 2 full-duplex serial channels.
82530 is a 4 MHz part.
82530-6 is a 6 MHz part. |
| Package: | 40-pin DIP |
| Manufacturers: | Intel |
| |
| 82586 |
LAN coprocessor |
| Package: | 48-pin DIP |
| Manufacturers: | Intel |
| |
| 82588 |
LAN controller |
| Comment: | 82588 - up to 2 Mbps, performs CSMA/CD data link control, encoding/decoding, clock recovery, carrier sense and collision detection.
82588-5 - up to 5 Mbps. |
| Package: | 28-pin DIP |
| Manufacturers: | Intel |
| |
| 82730 |
Text coprocessor |
| Comment: | Supports high-quality text displays with proportional spacing, subscript/superscript, character attributes, etc.
Supports high-quality graphics with manipulation and display of bitmap strings. |
| Package: | 68-pin CLCC |
| Manufacturers: | Intel |
| |
| 82731 |
Video interface controller |
| Comment: | Generates video signal from character character and attribute information.
Works with 82730 text coprocessor.
82731 - 50 MHz dot rate.
82731-2 - 80 MHz dot rate. |
| Package: | 40-pin DIP |
| Manufacturers: | Intel |
| |
