Support/peripheral/other chips - 8085 family

SAB1791	Floppy disk formatter/controller
Comment:	Supports single density and double density drives. Inverted data bus. Single sided operation.
Package:	40-pin DIP
Manufacturers:	Siemens
Siemens	SAB1791-02-P
SAB1793	Floppy disk formatter/controller
Comment:	Supports single density and double density drives. Single sided operation.
Package:	40-pin DIP
Manufacturers:	Siemens
Siemens	SAB1793-02-P
SAB1795	Floppy disk formatter/controller
Comment:	Supports single density and double density drives. Inverted data bus. Double sided operation.
Package:	40-pin DIP
Manufacturers:	Siemens
Siemens	SAB1795-02-P
SAB1797	Floppy disk formatter/controller
Comment:	Supports single density and double density drives. Double sided operation.
Package:	40-pin DIP
Manufacturers:	Siemens
Siemens	SAB1797-02-P
SAB2793B	Advanced floppy disk formatter/controller
Comment:	Supports single and double density drives. Software compatible with SAB179x. Single sided operation.
Package:	40-pin DIP
Manufacturers:	Siemens
Siemens	SAB2793B-P
SAB2797B	Advanced floppy disk formatter/controller
Comment:	Supports single and double density drives. Software compatible with SAB179x. Double sided operation.
Package:	40-pin DIP
Manufacturers:	Siemens
Siemens	SAB2797B-P
7201A	Multi-protocol serial communication controller
Comment:	Two full-duplex serial channels. 4 independent DMA channels.
Package:	40-pin DIP
Manufacturers:	NEC, Siemens
NEC	UPD7201AC, UPD7201AD, D7201AC, D7201AD
Siemens	SAB7201A-P
UPD7210	Intelligent general purpose interface bus controller
Comment:	IEEE 488-1978 standard compliant.
Package:	40-pin DIP
Manufacturers:	NEC
NEC	UPD7210C, D7210C
8155H	2048-bit (256x8) static RAM with I/O ports and timer
Comment:	2 8-bit I/O ports and 1 6-bit I/O port. Programmable 14-bit timer/counter. 8155H is compatible with 8085AH microprocessor. 8155H-2 is compatible with 8085AH-2 and 5 MHz version of 8088 microprocessors.
Package:	40-pin DIP
Manufacturers:	AMD, Intel, NEC
AMD	D8155, D8155H, D8155B, D8155HB, D8155-2, D8155H-2, D8155-2B, D8155H-2B, ID8155, ID8155H, ID8155B, ID8155HB, ID8155-2, ID8155H-2, ID8155-2B, ID8155H-2B, P8155, P8155H, P8155B, P8155HB, P8155-2, P8155H-2, P8155-2B, P8155H-2B, 8155/BQA
Intel	D8155H, D8155H-2, P8155H, P8155H-2
NEC	UPD8155C, UPD8155HC, UPD8155C-2, UPD8155HC-2, D8155C, D8155HC, D8155C-2, D8155HC-2
81C55	2048-bit (256x8) CMOS static RAM with I/O ports and timer
Comment:	2 8-bit I/O ports and 1 6-bit I/O port. 14-bit timer/counter.
Packages:	40-pin DIP, 44-pin QFP
Manufacturers:	OKI
OKI	MSM81C55RS, MSM81C55GS
8156H	2048-bit (256x8) static RAM with 2 8-bit I/O ports, 1 6-bit I/O port and 14-bit timer/counter
Comment:	8156H is compatible with 8085AH microprocessor. 8156H-2 is compatible with 8085AH-2 and 5 MHz version of 8088 microprocessors.
Package:	40-pin DIP
Manufacturers:	AMD, Intel, NEC
AMD	D8156, D8156H, D8156B, D8156HB, D8156-2, D8156H-2, D8156-2B, D8156H-2B, ID8156, ID8156H, ID8156B, ID8156HB, ID8156-2, ID8156H-2, ID8156-2B, ID8156H-2B, P8156, P8156H, P8156B, P8156HB, P8156-2, P8156H-2, P8156-2B, P8156H-2B, 8156/BQA
Intel	D8156H, D8156H-2, P8156H, P8156H-2
NEC	UPD8156C, UPD8156HC, UPD8156C-2, UPD8156HC-2, D8156C, D8156HC, D8156C-2, D8156HC-2
8185	1024 x 8 bit static RAM
Comment:	8185 is for 8085AH CPU. 8185-2 is compatible with 8085AH-2 CPU.
Package:	18-pin DIP
Manufacturers:	DATA
DATA	Intel:
8202A	Dynamic RAM controller
Comment:	Provides signals necessary to control 2117 and 2118 dynamic memory chips. 8202A-1 and 8202A-3 support an internal crystal oscillator.
Package:	40-pin DIP
Manufacturers:	Intel
8203	Dynamic RAM controller
Comment:	Controls 2164, 2117 and 2118 dynamic memory chips. 8203A-1 and 8203A-3 support an internal crystal oscillator. 8202A-3 is a ±5% Vcc part.
Package:	40-pin DIP
Manufacturers:	Intel
Intel	D8203
82C12	8-bit I/O port
Comment:	CMOS technology. Compatible with 8212.
Packages:	24-pin DIP, 24-pin flat package
Manufacturers:	OKI
OKI	MSM82C12RS, MSM82C12GS
8237A	High performance programmable 4-channel DMA controller
Comment:	Transfer rate is up to 1.6 Mb/s (8237A-5). 8237A is a 3 MHz part. 8237A-4 is a 4 MHz part. 8237A-5 is a 5 MHz part.
Package:	40-pin DIP
Manufacturers:	AMD, Intel, NEC, Siemens, UMC
AMD	D8237A, D8237AB, D8237A-4, D8237A-4B, D8237A-5, D8237A-5B, ID8237A, ID8237AB, ID8237A-4, ID8237A-4B, ID8237A-5, ID8237A-5B, P8237A, P8237AB, P8237A-4, P8237A-4B, P8237A-5, P8237A-5B, 8237A/BQA, 8237A-4/BQA
Intel	D8237A, D8237A-5, P8237A, P8237A-5
NEC	UPD8237AC-5, D8237AC-5
Siemens	SAB8237A-P, SAB8237A-5-P
UMC	UM8237A, UM8237A-4, UM8237A-5
82C37A-5	CHMOS high performance programmable 4-channel DMA controller
Comment:	5 MHz part.
Packages:	40-pin DIP, 44-pin PLCC, 44-pin QFP
Manufacturers:	Intel, OKI
OKI	MSM82C37A-5RS, MSM82C37A-5GS
8251A	Programmable communication interface
Comment:	Asynchronous and synchronous operation.
Package:	28-pin DIP
Manufacturers:	AMD, Intel, NEC
AMD	D8251A, ID8251A, P8251A, D8251AB, ID8251AB, P8251AB, 8251/BXA
Intel	D8251A, P8251A
NEC	UPD8251AC, UPD8251AFC, D8251AC, D8251AFC
8253	Programmable interval timer
Comment:	The chip has 3 16-bit programmable timers/counters. 8253-5 is compatible with 8085 processor.
Package:	24-pin DIP
Manufacturers:	AMD, Intel, NEC, National Semiconductor, UMC
AMD	D8253, D8253B, ID8253, ID8253B, P8253, P8253B, D8253-5, D8253-5B, P8253-5, P8253-5B, D8253-2, D8253-2B, P8253-2, P8253-2B, 8253/BJA
Intel	D8253, D8253-5, P8253, P8253-5
NEC	UPD8253C-2, UPD8253C-5, D8253C-2, D8253C-5
National Semiconductor	?INS8253N, ?INS8253D
UMC	UM8253, UM8253-5
8255A	Programmable peripheral interface
Comment:	The chip has 24 programmable I/O pins. 8255A-5 is compatible with 8085 systems.
Package:	40-pin DIP
Manufacturers:	AMD, Intel, NEC
AMD	D8255A, D8255AB, D8255A-5, D8255A-5B, ID8255A, ID8255AB, ID8255A-5, ID8255A-5B, P8255A, P8255AB, P8255A-5, P8255A-5B, 8255A/BQA
Intel	D8255, D8255A-5, P8255, P8255A-5
NEC	UPD8255AC-2, UPD8255AC-5, D8255AC-2, D8255AC-5
82C55A	CHMOS programmable peripheral interface.
Comment:	The chip has 24 programmable I/O pins.
Packages:	40-pin DIP, 44-pin PLCC, 44-pin QFP
Manufacturers:	AMD, Intel, OKI, UMC
AMD	D82C55A, D82C55A-2, ID82C55A, ID82C55A-2, P82C55A, P82C55A-2
OKI	MSM82C55A-5RS, MSM82C55A-5GS
UMC	UM82C55A
SAB8256A	Programmable multifunction UART
Comment:	Up to 19.2 K Baud with internal baud rate generator. Interrupt controller with 8 priority levels. 5 programmable 8-bit timers/counters. 2 8-bit I/O ports. SAB8256A support up to 3 MHz processors. SAB8256A-2 supports up to 8 MHz processors.
Package:	40-pin DIP
Manufacturers:	Siemens
Siemens	SAB8256A-C, SAB8256A-P, SAB8256A-2-C, SAB8256A-2-P
8257	Programmable 4-channel DMA controller
Comment:	8257-5 is a high-speed version of 8257
Package:	40-pin DIP
Manufacturers:	Intel, NEC, National Semiconductor
Intel	D8257, D8257-5, P8257, P8257-5
NEC	UPD8257C-2, UPD8257C-5, D8257C-2, D8257C-5
National Semiconductor	INS8257N, INS8257D
8259A	Programmable interrupt controller
Comment:	8-level priority controller expandable to 64 levels. 8259A-8 is a 2 MHz part. 8259A is a 5 MHz part. 8259A-2 is an 8 MHz part.
Package:	28-pin DIP
Manufacturers:	AMD, Intel, NEC, Siemens, UMC
AMD	D8259A, D8259A-2, D8259A-8, ID8259A, ID8259A-2, ID8259A-8, P8259A, P8259A-2, P8259A-8, 8259A/BXA, 8259A-2/BXA
Intel	D8259A, D8259A-2, D8259A-8, P8259A, P8259A-2, P8259A-8
NEC	UPD8259AC, UPD8259AC-2, D8259AC, D8259AC-2
Siemens	SAB8259A-P, SAB8259A-2P
UMC	UM8259A
82C59A	CHMOS programmable interrupt controller
Comment:	8-level priority controller. Pin compatible with 8259A. Compatible with 80C86 and 80C88 processors.
Packages:	28-pin DIP, 28-pin PLCC, 32-pin flat package
Manufacturers:	AMD, Intel, OKI
AMD	D82C59A, ID82C59A, P82C59A
OKI	MSM82C59A-2RS, MSM82C59A-2GS
8274	Multi-protocol serial controller
Comment:	4 DMA channels. Two full-duplex transmitters and receivers. Up to 880 K Baud.
Package:	40-pin DIP
Manufacturers:	Intel
Intel	D8274, P8274
8275H	Programmable CRT controller
Package:	40-pin DIP
Manufacturers:	Intel
Intel	P8275H
8276H	Small system CRT controller
Comment:	8276-2 has 3 MHz clock.
Package:	40-pin DIP
Manufacturers:	Intel
8282	Octal latch with 3-state outputs
Package:	20-pin DIP
Manufacturers:	Intel, NEC
Intel	D8282, P8282
NEC	UPB8282C
8283	8-bit latch with 3-state outputs
Comment:	Inverts input data.
Package:	20-pin DIP
Manufacturers:	Intel, NEC
Intel	D8283, P8283
NEC	UPB8283C
8286	8-bit bus transeiver with 3-state outputs
Package:	20-pin DIP
Manufacturers:	Intel, NEC
Intel	D8286, P8286
NEC	UPB8286C
8287	8-bit bus transeiver with 3-state outputs
Comment:	Inverts input data.
Package:	20-pin DIP
Manufacturers:	Intel, NEC
Intel	D8287, P8287
NEC	UPB8287C
8291A	GPIB talker/listener
Comment:	Designed to interface microprocessors to an IEEE 488 Digital interface bus.
Package:	40-pin DIP
Manufacturers:	Intel
Intel	D8291A, P8291A
8294A	Data encryption/decryption unit
Comment:	Includes DMA interface. 400 bytes per second conversion rate.
Package:	40-pin DIP
Manufacturers:	Intel
Intel	D8294A, P8294A
MSM83C55	2048x8 mask ROM with I/O ports
Comment:	2 8-bit I/O ports.
Packages:	40-pin DIP, 44-pin QFP
Manufacturers:	OKI
8755A	16384-bit (2048 x 8) EPROM with 2 8-bit I/O ports
Comment:	8755A-2 is compatible with 8085AH-2 and 5 MHz version of 8088
Package:	40-pin DIP
Manufacturers:	Intel
UPD71059	CMOS interrupt control unit
Comment:	8 interrupt requests per chip. One master UPD71059 chip can drive up to 8 slave UPD71059, i.e. up to 64 interrupt requests can be processed.
Packages:	28-pin DIP, 44-pin QFP, 28-pin PLCC
Manufacturers:	NEC
NEC	UPD71059C, UPD71059G, UPD71059L, D71059C, D71059G, D71059L