SL726 (Intel Mobile Pentium 4 3.067 / 1.6 GHz)

Picture
SL726
General information
TypeCPU / Microprocessor
FamilyIntel Mobile Pentium 4
Part numberRK80532GE083512
Frequency (GHz)3.067 / 1.6
Bus speed (MHz)  ? 533
Package type478-pin FC-PGA2
Socket typeSocket 478 (mPGA478B)
 
Architecture / Microarchitecture / Other
CPUID0F29h
Core steppingD1
Processor coreNorthwood
Manufacturing technology (micron)0.13
L2 cache size (KB)  ? 512
FeaturesEnhanced SpeedStep technology  ? 
Core voltage (V)  ? 1.550/1.200
Case temperature (°C)  ? 100
 
Notes on sSpec SL726
  • Processors with this S-Spec number have multiple VIDs. Core voltage specified in the table above is the maximum voltage.
 
Related Links
S-Spec chart
 
View comments
Add comment
Get page HTML code
Link to this page

Related S-Specs
Find Mobile Pentium 4 S-Spec numbers with:

Same socket
Same CPUID
Same stepping

Thank you diabolikoverclock...saved me some trouble

2009-02-28 03:43:58
Posted by: Bdubs

Thank you CPU World. If i hadn't seen this post from diabolikoverclock i would have mistakenly jumped on a mobile P4 rather than a P4-M processor for a desktop w/ locked BIOS. After seem that I searched elsewhere and found that same info about a desktop locking it at 12x multiplier and therefore if you can't raise the FSB it's stuck at whatever the MOBO detects it at. but NOT anywhere close to 3.06Ghz

 

2007-01-20 16:16:59
Posted by: tayler

whats strange on my motherboard this cpu works correctly and i read that stepping D0 works on chipset 875 so seems fine .

upgradeing from celeron 2.66

2007-01-13 01:39:09
Posted by: Kit

Will my laptop recognise the cpu at 3.06 if I upgrade from a 2.66 Celeron?

Thanks

Response: Depends on the motherboard. Even if I know your board model I won't be able to help - I don't have data on laptop motherboards.

 

2006-10-19 14:35:22
Posted by: diabolikoverclock

Hi, usually this processors works in desktop motherboard only at 12X multiplier..
The desktops MB cant see the speedstep and the cpu work LOCKED at the minumum value 133x12=1600mhz
You can overclock it at 200x12at2.400MHZ or 250x12at3.000MHZ
In default 200x12 it results a P4 desktop 2400-800HT
and work at very low temperature max 33°C
In minim setting 133x12 it can work without fan!

cpu

2006-09-17 03:28:45
Posted by: bajanzen@quicknet.nl

can i use this cpu in a "normale" motherboard.

I want to put this cpu in a MSI 875 motherboard. Socket 478

thanks for the advise

Ben

Response: It may support it, but I don't know for sure. Desktop motherboards are not tested with mobile processors. Please contact MSI.
  Terms and Conditions · Contact Us (c) Copyright 2003 - 2008 Gennadiy Shvets