CPU Shack: IBM POWER6 Ceramic CPUs - Offers Accepted

[CPUShack]

These are the nice big POWER6 processors in the thick ceramic package


POWER6 very nice condition $10 each
SOLD OUTx POWER6 44M1236 $10
SOLD OUTx POWER6 46J2572 $10
SOLDx POWER6 43E7456 $10
SOLDx POWER6 44M1233 $10

These have some minor chips (good LGA lands though)
1x POWER6 43E7454 $6
1x POWER6 44M1236 $6
SOLD OUTx POWER6 46J2572 $6
SOLD OUTx POWER6 44M1233 $6

Others
SOLDx POWER6 43E7456 scratched $4
SOLD OUTx HP 3AC1-0005 $9
SOLD OUTx HP 3AC3-0002 $2

[cvandijk]

1x HP 3AC3-0002 $2

[crazybubba64]

1x HP 3AC3-0002 $2

[MEX68KECB]

RISCY business. I'll take both of these:

2x HP 3AC1-0005 $9

[Birdman.]

1x POWER6 43E7456 scratched $4

[princess]

POWER6 44M1236 $10
POWER6 46J2572 $10
for me, please!

[CPUShack]

Offers Accepted

[pixelmanca]

I've bought these before from scrap dealers for $5 each, so I'd give you $12 for 2 of them, the 43E7456 and the 44M1233, the 2 left that are in "very nice condition", as long as there are absolutely no chips anywhere on the ceramic plates, not even very small ones...

[CPUShack]

[pixelmanca]

OK, then you tell me what the lowest you'd accept for 2 of those...

[CPUShack]

[pixelmanca]

OK, I'll pay you $8 for the 44M1233 that's in perfect condition, just throw it in my box... well place it gently inside, so it doesn't get chipped LOL...

[gg1978]

1x POWER6 46J2572 $10
1x POWER6 43E7456 $10
2x POWER6 46J2572 $6
2x POWER6 44M1233 $6

[pixelmanca]

In case anyone here doesn't know what these look like when they've had their very heavy, plain metal heat spreader covers removed...

Lurking below those metal covers are very nice little modules with big mirror dies and lots of different kinds of capacitors.

The one of the left is what John is selling here, a Power 6 single die module and the one on the right is a Power 6+ single die module with a very different configuration inside.

So far the only way that I know of to tell them apart is that the Power 6+ modules have an extra line of information along with a QR code, that I've outlined in red, on the right side of their heat spreader covers.





(Click on the pictures to see the high resolution versions.)

As an FYI, these modules require very careful removal of their heat spreader covers after heating them up, because the ceramic plates just love to chip on the edges when they're hot enough to get the covers to come off.

You also have to be very careful when you remove the covers because the ceramic plate will be hot enough to allow all of those tiny capacitors to slide right off of their solder pads. I learned that fact the hard way on the first 2 that I de-lidded LOL...

[todayisme2000]

1x POWER6 44M1236 $10
1x POWER6 46J2572 $10
1x POWER6 43E7456 $10

for $20 ?