| View previous topic :: View next topic |
| Author |
Message |
CPUShack
Joined: 16 Jun 2003
Posts: 34259
Location: State of Jefferson, USA
|
 Posted: Wed Dec 18, 2019 7:57 pm Post subject: CPU Shack: NEC Proserva V Plus - Dual Pentium 200 Systems |
 |
|
Well I finally sorted through all the 20 I got, and got them all to run so its time to make these available to people
These are NEC Proserva V Plus systems (a rebranded Zenith Z-Server WL)
-Dual Socket 5 with 2x Pentium 200 SY044
-512K Cache (256k onboard + 256K COAST)
-Onboard Cirrus Logic video (CL5440 with 1MB of RAM)
-3 PCI slots, 6 EISA slots (1 shared)
-8x 72-pin RAM slots - supports ECC/Parity Loaded with 128MB of RAM (8x 16MB sticks)
-Onboard SCSI - internal and external - Adaptec AIC 7880P and AIC-6370
Ultra/Ultra Wide
Toshiba SCSI CD-ROM XM-5401TA
1.44MB Floppy Drive
These are all tested to POST
These are powered by an Intel 82439HX Chipset
More info about them (including documentation) here at Vogons)
https://www.vogons.org/viewtopic.php?f=46&t=70128
I will do $200 each for these, that covers my costs of getting them and adding the second CPU and RAM
I also have NIB Cirrus Logic CL5434 PCI Video cards with 1MB of RAM (upgradeable to 2MB)
$20 each for those
_________________
New for 2025! The CPU Shack has a co-processor!
Visit The CPU Shack of microprocessor history and information.
Last edited by CPUShack on Thu May 29, 2025 1:35 am; edited 2 times in total |
|
| Back to top |
|
 |
CPUShack
Joined: 16 Jun 2003
Posts: 34259
Location: State of Jefferson, USA
|
|
| Back to top |
|
|
feipoa
Joined: 08 Mar 2011
Posts: 553
Location: Canada
|
| Posted: Wed Dec 18, 2019 8:04 pm Post subject: |
|
|
1x NEC Proserva V Plus for me.
_________________
The only thing I hate more than straightening CPU pins is having CPU's with bent pins in my collection. |
|
| Back to top |
|
|
brutuscat2
Joined: 03 Dec 2019
Posts: 212
Location: US
|
| Posted: Wed Dec 18, 2019 8:30 pm Post subject: |
|
|
| 1x NEC Proserva V Plus |
|
| Back to top |
|
|
debs3759
Joined: 18 Jan 2006
Posts: 9477
Location: Northampton, Divided Kingdom
|
| Posted: Wed Dec 18, 2019 8:33 pm Post subject: |
|
|
I confirm my request from the group buy. I'll take an NIB CL-GD5434 as well.
_________________
My graphics card database can be found at http://www.gpuzoo.com.
I can resist anything except temptation.
Debs |
|
| Back to top |
|
|
debs3759
Joined: 18 Jan 2006
Posts: 9477
Location: Northampton, Divided Kingdom
|
| Posted: Wed Dec 18, 2019 8:40 pm Post subject: |
|
|
What sort of weight are they? What is international shipping likely to cost?
_________________
My graphics card database can be found at http://www.gpuzoo.com.
I can resist anything except temptation.
Debs |
|
| Back to top |
|
|
CPUShack
Joined: 16 Jun 2003
Posts: 34259
Location: State of Jefferson, USA
|
| Posted: Wed Dec 18, 2019 9:01 pm Post subject: |
|
|
| debs3759 wrote: | | What sort of weight are they? What is international shipping likely to cost? |
34lbs (a bit more with a box etc obviously)
Parcel Monkey to you is probably not horrible for that
_________________
New for 2025! The CPU Shack has a co-processor!
Visit The CPU Shack of microprocessor history and information. |
|
| Back to top |
|
|
debs3759
Joined: 18 Jan 2006
Posts: 9477
Location: Northampton, Divided Kingdom
|
| Posted: Wed Dec 18, 2019 9:17 pm Post subject: |
|
|
Cool. I will probably leave it until I have paid enough to have it filled with tray and whatever else can be squeezed inside the case 
_________________
My graphics card database can be found at http://www.gpuzoo.com.
I can resist anything except temptation.
Debs |
|
| Back to top |
|
|
horun
Joined: 18 Dec 2019
Posts: 1
|
| Posted: Wed Dec 18, 2019 10:07 pm Post subject: |
|
|
| I want one Proserva V Plus with one CL5434 PCI now and a second one for spare parts in a few months or so (case condition does not matter on second one) if possible. |
|
| Back to top |
|
|
Warlord
Joined: 18 Dec 2019
Posts: 1
|
| Posted: Thu Dec 19, 2019 12:44 am Post subject: |
|
|
| 1x NEC Proserva V Plus for me, same warlord from vogons, you can email me, since i can't message here. |
|
| Back to top |
|
|
kwyjibo
Joined: 19 Dec 2019
Posts: 1
|
| Posted: Thu Dec 19, 2019 3:45 am Post subject: |
|
|
1x NEC Proserva V Plus
1x NIB Cirrus Logic CL5434 PCI Video card
Thanks for the operation! |
|
| Back to top |
|
|
Chinny22
Joined: 19 Dec 2019
Posts: 1
|
| Posted: Thu Dec 19, 2019 4:13 am Post subject: |
|
|
| yes please! as long as shipping isn't more then the machine, will PM you my address |
|
| Back to top |
|
|
feipoa
Joined: 08 Mar 2011
Posts: 553
Location: Canada
|
| Posted: Sat Feb 22, 2020 10:53 pm Post subject: |
|
|
I'd like to mention that single CPU K6-III's and Tillamook P266 MMX chips work in this board when using a split-rail voltage regulator module. Dual CPU P233 MMX chips also work when using a VRM. Tested with a GeForce2 in NT4, Win98SE, and W2K using the onboard Adaptec AIC-7880 SCSI controller (Adaptec 2940UW).
_________________
The only thing I hate more than straightening CPU pins is having CPU's with bent pins in my collection. |
|
| Back to top |
|
|
black_monolith
Joined: 18 Mar 2007
Posts: 248
Location: Shandong, China
|
| Posted: Sun May 24, 2020 8:30 pm Post subject: |
|
|
| I think it's cooler to leave the P200s in there. P200 was overshadowed by PPro 200 in the server market and the P200MMX in the consumer market, so having a system with Dual P200s is pretty unique in my opinion. |
|
| Back to top |
|
|
feipoa
Joined: 08 Mar 2011
Posts: 553
Location: Canada
|
| Posted: Mon May 25, 2020 12:02 am Post subject: |
|
|
Dual P233MMX was even less common though.
_________________
The only thing I hate more than straightening CPU pins is having CPU's with bent pins in my collection. |
|
| Back to top |
|
|
|
