| View previous topic :: View next topic |
| Author |
Message |
rjluna2
Joined: 27 Oct 2014
Posts: 1302
Location: Hiram, GA, USA
|
 Posted: Fri Oct 28, 2022 8:00 am Post subject: Removing 486 Heatsink |
 |
|
| How do remove this type of Intel 80486 microprocessor heatsink here without breaking or destroying the etch? |
|
| Back to top |
|
 |
Bator
Joined: 28 Oct 2013
Posts: 1285
Location: Russia / Yakutia & Siberia
|
| Posted: Fri Oct 28, 2022 9:20 am Post subject: |
|
|
First remove the heatsink by heating it. The main thing is to warm it up well so that it comes off like clockwork. On cold it will be removed with paint. This is not difficult. Difficulties will follow. Remove adhesive from the surface of the CPU. I use an industrial hair dryer, gradually adjust the temperature until the glue becomes soft and then slowly remove the glue with a wooden object (sushi sticks as an example)
P.S. Usually for Intel under heatsink 80486DX2-66
Good luck to you!
_________________
WTB List / Trade List
Last edited by Bator on Fri Oct 28, 2022 9:49 am; edited 1 time in total |
|
| Back to top |
|
|
rjluna2
Joined: 27 Oct 2014
Posts: 1302
Location: Hiram, GA, USA
|
| Posted: Fri Oct 28, 2022 9:28 am Post subject: |
|
|
Thanks  |
|
| Back to top |
|
|
|
