| View previous topic :: View next topic |
| Author |
Message |
gshv
Joined: 01 Feb 2003
Posts: 7898
Location: Fairfax, VA USA
|
|
| Back to top |
|
 |
fRaSsL
Joined: 31 Mar 2003
Posts: 1570
|
 Posted: Wed Feb 18, 2004 11:48 am Post subject: |
 |
|
Hmm... the question is... how will you know the actual clock speed, if you don't have the mobo?!
_________________
Frank. |
|
| Back to top |
|
|
gshv
Joined: 01 Feb 2003
Posts: 7898
Location: Fairfax, VA USA
|
| Posted: Wed Feb 18, 2004 12:08 pm Post subject: |
|
|
| fRaSsL wrote: | | Hmm... the question is... how will you know the actual clock speed, if you don't have the mobo?! |
I just used information readily available on the net, for example, this article in Byte magazine:
http://www.byte.com/art/9411/sec4/art4.htm
Genna |
|
| Back to top |
|
|
fRaSsL
Joined: 31 Mar 2003
Posts: 1570
|
| Posted: Wed Feb 18, 2004 1:49 pm Post subject: |
|
|
Hehe... yes, but for example Nexgen P90 is not = Nexgen P90. They vary in the clock speed even with the same P-rating. Thats why I'm confused with your MHz values. I think it's not possible to write exact Nexgen clock frequencies, if you don't have the mobo for each Nexgen CPU.
_________________
Frank. |
|
| Back to top |
|
|
Minuteman
Joined: 21 May 2003
Posts: 331
|
| Posted: Thu Feb 19, 2004 11:12 am Post subject: |
|
|
As far as I know it's not possible (even with a mobo) to know the speed of a nexgen if it's not marked on it. The only thing you can do if you get a mobo is to hope that the jumpers weren't changed and deduce the speed from the settings.
There is a place with XXXX markings on the chip, the speed should be there but it wasn't used as mtx500 (if I remember correctly) told on a cpu-museum.de post.
PS: The P100 with little heatspreader is a nice chip, most of them have big heatspreaders. |
|
| Back to top |
|
|
gshv
Joined: 01 Feb 2003
Posts: 7898
Location: Fairfax, VA USA
|
| Posted: Thu Feb 19, 2004 11:51 am Post subject: |
|
|
Live and learn  I will remove actual speed from the pages tonight and wil leave only rated speed.
Genna |
|
| Back to top |
|
|
Minuteman
Joined: 21 May 2003
Posts: 331
|
| Posted: Thu Feb 19, 2004 12:40 pm Post subject: |
|
|
| Quote: | | Hehe... yes, but for example Nexgen P90 is not = Nexgen P90. They vary in the clock speed even with the same P-rating. |
Are you sure about that? I think that 1 PR = 1 Clock speed. How could you setup your motherboard if it isn't the case? |
|
| Back to top |
|
|
Simmayor
Joined: 23 Apr 2003
Posts: 328
Location: Deventer Ov, The Netherlands
|
| Posted: Thu Feb 19, 2004 2:51 pm Post subject: |
|
|
Hi,
I have a mobo if you want it Gennadiy.
Simmayor |
|
| Back to top |
|
|
gshv
Joined: 01 Feb 2003
Posts: 7898
Location: Fairfax, VA USA
|
| Posted: Thu Feb 19, 2004 3:41 pm Post subject: |
|
|
Yes, I'm interested.
Genna |
|
| Back to top |
|
|
gshv
Joined: 01 Feb 2003
Posts: 7898
Location: Fairfax, VA USA
|
| Posted: Fri Feb 20, 2004 1:00 am Post subject: |
|
|
I removed processor speed from Nexgen pages and left only rated speed.
Genna |
|
| Back to top |
|
|
|
![[ Hidden ]](https://cdn.cpu-world.com/forum/templates/CPUWorld/images/lang_english/icon_email.gif "[ Hidden ]"){kind=icon}
