Does the PIII support RDRAM?
Goto page Previous  1, 2

Post new topic   Reply to topic    CPU-World.com forums Forum Index -> Memory, peripheral and other chips
View previous topic :: View next topic  
Author Message
UMMR



Joined: 23 Aug 2007
Posts: 381
Location: Udine, ITALY

PostPosted: Fri May 07, 2010 2:45 am    Post subject: Reply with quote

Hello,
there are several Pentium III systems equipped with Rambus (RDRAM). Examples are the IBM IntelliStation M Pro 6866 (2 x Xeon 733 MHz, chipset i840, ECC) and the HP Kayak XM600 (i820 chipset, non-ECC).
"Rambus" is the name of the original manufacturer of these RAMs, Rambus Corp. The RDRAM has been invented in 1996 and presented that year at the annual ISSSC conference (you can still find the papers on the web). The Intel chipsets capables to support RDRAM are the original i820 Camino (1999), the more advanced i840, the i850 (first chipset for Pentium 4 systems) and the i860 for Xeon systems.
Paolo
Back to top
View user's profile Send private message   Visit poster's website
Marcin



Joined: 02 Jan 2005
Posts: 8519
Location: Poland

PostPosted: Fri May 07, 2010 3:38 am    Post subject: Reply with quote

I also saw ASUS Socket 370 board with DDR banks.
_________________
Visit ABC CPU - Virtual CPU Museum.
Back to top
View user's profile Send private message [ Hidden ] Visit poster's website
Tetrium



Joined: 25 Apr 2010
Posts: 466
Location: The Netherlands

PostPosted: Fri May 07, 2010 5:15 am    Post subject: Reply with quote

Marcin wrote:
I also saw ASUS Socket 370 board with DDR banks.


They use a VIA chipset though. But at least it's easier finding big DDR modules then finding big SDRAM modules Wink
Back to top
View user's profile Send private message  
D.8080



Joined: 03 Apr 2006
Posts: 1474
Location: Italy

PostPosted: Fri May 07, 2010 5:49 am    Post subject: Reply with quote

Tetrium wrote:
Marcin wrote:
I also saw ASUS Socket 370 board with DDR banks.


They use a VIA chipset though. But at least it's easier finding big DDR modules then finding big SDRAM modules Wink



Only recently I could grasp some high density pc-133 512mb modules.
Most I saw were pulled from HP servers.

Having a P3 with Win98Se and 256 of ram was really playing it hard... And a Voodoo 3000 agp Wink
Back to top
View user's profile Send private message  
Tetrium



Joined: 25 Apr 2010
Posts: 466
Location: The Netherlands

PostPosted: Fri May 07, 2010 5:59 am    Post subject: Reply with quote

Another advantage the VIA P3 SDRAM chipsets had over the Intel ones (most noticeably the i815 and the 440BX) is the support for higher density SDRAM modules and (in the case of the i815) support for more then 512MB ram.

They aren't as fast as the i815 but imo they make up for that in flexibility Wink
Back to top
View user's profile Send private message  
frag_



Joined: 17 Nov 2008
Posts: 4015
Location: Estonia

PostPosted: Fri May 07, 2010 7:08 am    Post subject: Reply with quote

VIA Apollo Pro 133A can handle up to 4 Gb (socket 370 record holder, only with ECC modules, otherwise 2 Gb),
and was one of the first asynchronous chipset (can run memory at +33 or -33 MHz from fsb).
It was not so slow witn enabled 4-way memory bank interleave and 2-2-2-5 timings.
Also SiS 630 takes up to 3 Gb.


Last edited by frag_ on Fri May 07, 2010 7:45 am; edited 1 time in total
Back to top
View user's profile Send private message [ Hidden ]
Tetrium



Joined: 25 Apr 2010
Posts: 466
Location: The Netherlands

PostPosted: Fri May 07, 2010 7:12 am    Post subject: Reply with quote

But iirc the Sis630 had crappy performance, even compared to the VIA P3 chipsets
Back to top
View user's profile Send private message  
D.8080



Joined: 03 Apr 2006
Posts: 1474
Location: Italy

PostPosted: Fri May 07, 2010 1:29 pm    Post subject: Reply with quote

frag_ wrote:
VIA Apollo Pro 133A can handle up to 4 Gb (socket 370 record holder, only with ECC modules, otherwise 2 Gb),
and was one of the first asynchronous chipset (can run memory at +33 or -33 MHz from fsb).
It was not so slow witn enabled 4-way memory bank interleave and 2-2-2-5 timings.
Also SiS 630 takes up to 3 Gb.



That would be server models? For 4gb!!!! That rulz!
Back to top
View user's profile Send private message  
Qwerty



Joined: 20 May 2005
Posts: 3141
Location: Germany

PostPosted: Fri Jul 23, 2010 1:47 am    Post subject: Reply with quote

Leroy wrote:
Hi Mate

I think CPU supports DRAM.


Another SPAMMER Evil or Very Mad
Back to top
View user's profile Send private message  
Display posts from previous:   
Post new topic   Reply to topic    CPU-World.com forums Forum Index -> Memory, peripheral and other chips All times are GMT - 5 Hours
Goto page Previous  1, 2
Page 2 of 2
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Powered by phpBB © 2001 phpBB Group