I need HELP from EXPERT!! Is it BIOS problem?

Ch3ng · Joined: 02 Mar 2011 Posts: 2

I have bought a new CPU and have done all the setup, installation and applications in WIN7. So I try to backup the system with Clonezilla to .img. But after the cloning. I encountered the following problem from pic 1 to pic 2. Seems like it can't detect the harddisk. I try to enter the bios setup or any other options, it just couldn't response to it. And it will just stuck to the 2nd pic. USB, CD-rom and harddisk don't response.

When I power start the system, it will hang at pic 1 for 20second. Then pic2 is the next screen shown.

I try to to continuously hit <DEL>, <F9>, <F12> and <END> immediately the power is on, there is no response.

What problem could it be? ARRGH... New CPU but can't use it. Damn pissed off...

Please please let me know if anyone know how to solve this problem. Your help is greatly appreciated.

kosmokrator · Joined: 03 Jul 2008 Posts: 4085 Location: Athens-GR

try to reset yourm/b bios by get off the bios battery for at least one minute... press the power button few times with the psu off the AC power...

place back the battery and plug the ac cable again...

go to the bios and make the settings u wish...save and exit...
and ...i think u will be ok...

kosmokrator · Joined: 03 Jul 2008 Posts: 4085 Location: Athens-GR

also ..its a stupidquestion...but.......areu sure your keyboard is ok connected??
if is some usb/wirreles keyboard try a ps/2 ....

happens some times not recognized the wireless stuff

Guest · Posted: Wed Mar 02, 2011 1:32 pm Post subject:

You screwed the cloning.

If it were a bios problem you sure wouldn't go that far.

The string you getting on screen only says this:

- hey man, am lookin' for an Os to boot, but no go ---> hence the second screenshot

So, yoi either have to reinstall the Os, or try to figure out were it did go wrong on the image cloning.

Have you tried to put your hard disk as boot device n.1?
As suggested by kosmokrator, try to reset the cmos once.

The pc is working, just an OS issue.

dume

Guest · Posted: Wed Mar 02, 2011 1:36 pm Post subject:

HAve you tried unplugging your hd?
See if by unplugging it the system boots at least by the cd.

d.

kosmokrator · Joined: 03 Jul 2008 Posts: 4085 Location: Athens-GR

the thinks makes me wonder much is about not endering the bios setup.....

maybe the hdd excluded from boot order and for this got the message boot disk failure!

Marcin · Joined: 02 Jan 2005 Posts: 8519 Location: Poland

From your screens it was definitely crashed M$ OS. BIOS issue is when you see boot block procedure or you see nothing after update Smile

Guest · Posted: Wed Mar 02, 2011 4:47 pm Post subject:

Marcin · Joined: 02 Jan 2005 Posts: 8519 Location: Poland

No, I see I have to flash chip in external programmer Wink

Guest · Posted: Wed Mar 02, 2011 5:33 pm Post subject:

Ch3ng · Joined: 02 Mar 2011 Posts: 2

Thanks ppl. I've removed the batt and reset the cmos. Everything works well.

Really appreciated for those advices people..!!

You guys rocks.

Smile

kosmokrator · Joined: 03 Jul 2008 Posts: 4085 Location: Athens-GR

	News · Chips · Information · Forum · Links · About	Contact Us

	FAQ · Memberlist · Usergroups · Profile · Private Messages · Log in · Register	Search