| View previous topic :: View next topic |
| Author |
Message |
asprimake
Guest
|
 Posted: Sat Jun 29, 2013 2:03 pm Post subject: NEC CPU upgrade |
 |
|
Hello everyone,
Came here after lot of researches without results. I have a Packard Bell SW35 with a NEC Versa Premium motherboard and a Celeron M 410 CPU.
I want to upgrade it a bit and change the CPU, so I bought a Core Duo T5600 but all I had was a black screen after power button was on.
I'll need to know which CPU can this mobo support so I could make the upgrade.
Thanks again |
|
| Back to top |
|
 |
fenyal
Joined: 15 Jan 2013
Posts: 92
|
| Posted: Sat Jun 29, 2013 5:42 pm Post subject: |
|
|
| to help i will need further numbers for the model. (packard bell easynote sw35-001) <-- it should look something like that. |
|
| Back to top |
|
|
Guest
|
| Posted: Sat Jun 29, 2013 7:13 pm Post subject: |
|
|
| fenyal wrote: | | to help i will need further numbers for the model. (packard bell easynote sw35-001) <-- it should look something like that. |
Thanks for your reply. That's the one in fact, PB EasyNote SW35-001. |
|
| Back to top |
|
|
fenyal
Joined: 15 Jan 2013
Posts: 92
|
| Posted: Mon Jul 01, 2013 4:48 pm Post subject: |
|
|
the best i can gather on that motherboard (which is a lot of nothing) is the best processor i could safely recommend would be the Celeron m 450 because it is in the same family. i would not try to work outside of that family with out some support documentation which is non-existent even in other languages.
from what i see, that is a fairly old laptop and support from the manufacture has completely disappeared.
i can all but promise that this laptop will NOT take ANY dual core processors.
i hope this sheds some light on your problem. sorry for the bad news.. it's the only news i could find. |
|
| Back to top |
|
|
Guest
|
| Posted: Wed Jul 03, 2013 6:11 pm Post subject: |
|
|
That's a little (of a lot  , I ordered a T1500 core solo, I'm waiting for it. Hope that the mobo will support it. |
|
| Back to top |
|
|
Guest
|
| Posted: Mon Jul 08, 2013 1:07 pm Post subject: |
|
|
| Anonymous wrote: | | That's a little (of a lot , I ordered a T1500 core solo, I'm waiting for it. Hope that the mobo will support it. |
Nope didn't fit |
|
| Back to top |
|
|
fenyal
Joined: 15 Jan 2013
Posts: 92
|
| Posted: Mon Jul 08, 2013 3:47 pm Post subject: |
|
|
| sorry, but i think you are stuck in the celeron family as far as i'm safe to say. |
|
| Back to top |
|
|
gshv
Joined: 01 Feb 2003
Posts: 7898
Location: Fairfax, VA USA
|
| Posted: Mon Jul 08, 2013 8:56 pm Post subject: |
|
|
One thing I noticed is that your Celeron 410 has 533 MHz FSB, while the T5600 and T1500 have 667 MHz FSB. I suspect that 533 MHz FSB is the maximum for your board. Try to upgrade to T1350, or T2250/T2350/T2450, it may work.
Gennadiy |
|
| Back to top |
|
|
Gaelyan
Guest
|
| Posted: Mon Nov 11, 2013 1:20 am Post subject: CPU Upgrade motherboard NEC Versa bios Q3A27 |
|
|
CPU Upgrade motherboard NEC Versa bios Q3A27
It semmes that only Mono Core works on this Board .. as i try T2250 and T 5100, black screen
So .. i upgrade to M 450 and it works well |
|
| Back to top |
|
|
fenyal
Joined: 15 Jan 2013
Posts: 92
|
| Posted: Mon Nov 11, 2013 5:14 pm Post subject: |
|
|
| glad to hear you had some success. |
|
| Back to top |
|
|
|
![[ Hidden ]](https://cdn.cpu-world.com/forum/templates/CPUWorld/images/lang_english/icon_email.gif "[ Hidden ]"){kind=icon}
