Can see drive in BIOS but cant select to boot

[rays1205@yahoo.com]

I have a new GA-J1800N-D2H mainboard with built in CPU
Both SATA drives are connected to mailboard and power supply
In BIOS under ADVANCED and IDE CONFIGURATION I see my devices are

listed
however when I go to the BOOT menu my devices are not listed to boot from. When attempting to boot it reverts back to EFI shell with command

line, I checked all options and they appear correct. The AUTO feature is selected for the Serial-ATA Port 0 and 1.
Any help would be great and much appreciated.
Thanks Ray
Rays1205@yahoo.com

[lauren85]

Check in your BIOS. I think IDE/Legacy is disabled or not set as active.
Also verify that the optical unit (the only device on that IDE port) is set to be the port's Master device, and plugged into the END connector of its data ribbon.