| View previous topic :: View next topic |
| Author |
Message |
CPUShack

Joined: 16 Jun 2003 Posts: 34259 Location: State of Jefferson, USA
|
Posted: Tue Jun 16, 2020 4:37 pm Post subject: CPU Shack: Iwill P55TU Pent Motherboard w/ SCSI - SOLD |
|
|
Here is a very cool one
This is a Iwil P55TU motherboard based on the Intel HX chipset, complete with adaptec SCSI onboard.
Supports 4-72pin SIMMs, Adaptec RAIDBus, 68/50pin SCSI
Comes with Pentium 200 MMX, and all accessories, including a heatsink and fan.
$60 and its yours _________________ New for 2025! The CPU Shack has a co-processor!
Visit The CPU Shack of microprocessor history and information.
Last edited by CPUShack on Thu Jun 18, 2020 2:05 pm; edited 1 time in total |
|
| Back to top |
|
 |
CPUShack

Joined: 16 Jun 2003 Posts: 34259 Location: State of Jefferson, USA
|
|
| Back to top |
|
 |
ph4nt0m

Joined: 01 Jan 2018 Posts: 812 Location: Europe
|
Posted: Thu Jun 18, 2020 1:47 am Post subject: |
|
|
This board looks great, but it has also way too many complications to speak of. 430HX but only 64Mb cacheable, soldered Dallas chip, linear VRM which runs damn hot, and there were some BIOS related issues. I can offer $20 if you absolutely have to get rid of it. _________________ My Active Sales |
|
| Back to top |
|
 |
stamasd
Joined: 05 Jun 2014 Posts: 1311 Location: Connecticut
|
Posted: Thu Jun 18, 2020 4:08 am Post subject: |
|
|
| WTH is that extension behind the first PCI slot? Never seen anything like that. |
|
| Back to top |
|
 |
frag_
Joined: 17 Nov 2008 Posts: 4015 Location: Estonia
|
|
| Back to top |
|
 |
HowlerMonkey
Joined: 07 Feb 2021 Posts: 2 Location: Virginia
|
Posted: Sun Feb 07, 2021 12:11 pm Post subject: |
|
|
I built a system for a DAW in 1995 using an Iwill p55tu and added the Adaptec aro1130 for raid capability using striping without parity. I have scsi drives also in external cases....which I'm currently using for a fostex hard disc recorder.
It has an ati 3dxpression and pc2tv which was the two piece solution before the all-in-wonder series of cards and watched tv on it until analog tv disappeared.
Sound card is an awe32 ct39xx with 16 megs in each memory slot for 28 megs of usable onboard sample ram.
I used the spdif output to another card before converting the output to coaxial and later connecting to newer external devices.
This gives zero latency synth usage because it's all handled on the card and not hampered by system bus timing or pc overhead.
That mystery slot in the pics above is for the aro1130 raid controller.
Over the last 25 years drives have died and been replaced but the system runs great.
It all still works great and is still my soundfont machine long after my much newer kt7araid died in 2012.
The Dallas rtc worked for 10 years before replacement!
When it dies, I will get some newer industrial boards that still have 16bit isa slots and hardware bus mastering and dma (not all new isa slot boards have real dma and bus mastering....check for that if you consider one).
The plan is a few retro gaming rigs that still give me the soundfont functionality.
Last edited by HowlerMonkey on Sun Feb 07, 2021 12:17 pm; edited 1 time in total |
|
| Back to top |
|
 |
ph4nt0m

Joined: 01 Jan 2018 Posts: 812 Location: Europe
|
Posted: Sun Feb 07, 2021 12:17 pm Post subject: |
|
|
The last Intel chipsets that can do ISA DMA are the 8x5 series _________________ My Active Sales |
|
| Back to top |
|
 |
HowlerMonkey
Joined: 07 Feb 2021 Posts: 2 Location: Virginia
|
Posted: Sun Feb 07, 2021 12:19 pm Post subject: |
|
|
Thanks.....that kind of info is why I signed up here.
SET BLASTER=A220 I5 D1 H5 P330 E620 T6 |
|
| Back to top |
|
 |
|