Can any of these 2 adapters support Coppermine?

[excelsior]

Hello,
I have 2 adapters from socket 370 to slot 1.
These adapters work fine with Mendocino but I don't know if they support Coppermine.
I've search more information on them but I couldn't find any clear answer and I don't want to risk and to destroy a chip.
Can any of them support Coppermine?

Thanks in advance for any info!

https://imgur.com/a/Gp5Vym4
https://imgur.com/a/0XmEtT4

[max1024]

For Coppermine voltage must be ~1.75V on one of your slocket minimum is 2.0V You can used it but cooling system must be copper, but ideally it's better to find another adapter with more wide range of voltage.
A slocket without jumpers can be universal, but if not, then it will not remove the board from the working condition for short time.