| View previous topic :: View next topic |
| Author |
Message |
Shawn
Guest
|
 Posted: Tue Jul 18, 2006 11:13 am Post subject: P3 1000/256/133 skt370 ??? |
 |
|
Hello, I have a Giga-byte motherboard which does support the P3 1000/256/133 skt 370 processor. However, i have one of the SL5 spec which does allow my system to boot at all. My current SL4 800EB/256/133 isn't a problem. I'm curious what the problem is. I see that the 1Ghhz processor's can have an SL4 or SL5 spec.
Could anyone advise? |
|
| Back to top |
|
 |
D.8080
Joined: 03 Apr 2006
Posts: 1474
Location: Italy
|
| Posted: Tue Jul 18, 2006 12:51 pm Post subject: |
|
|
Is your bios actually supporting the processor? Sometimes the manual says the board supports the processor but in fact it's planned for a later release. Try to check bios dates, gigabyte it's friendly on cpu compatibility lists.
What's your board name? |
|
| Back to top |
|
|
Root
Joined: 11 Mar 2006
Posts: 64
|
| Posted: Tue Jul 18, 2006 3:02 pm Post subject: |
|
|
it isn't full S-Spec... What is the full S-Spec for these CPUs?
_________________
FreeBSD - forever |
|
| Back to top |
|
|
Guest
|
| Posted: Wed Jul 19, 2006 7:25 am Post subject: |
|
|
| dume wrote: | Is your bios actually supporting the processor? Sometimes the manual says the board supports the processor but in fact it's planned for a later release. Try to check bios dates, gigabyte it's friendly on cpu compatibility lists.
What's your board name? |
Cheers for your concern.
The Board name is Giga-byte 6vxc7-4xp.
I think the SL5DR i have could be blown. I have my eyes on a SL4C8 1000/256/133 on ebay. If i buy thou, i can't return it, so i need to be sure on the right spec. What do you think? |
|
| Back to top |
|
|
Shawn
Guest
|
| Posted: Wed Jul 19, 2006 7:28 am Post subject: |
|
|
| Root wrote: |
it isn't full S-Spec... What is the full S-Spec for these CPUs? |
The trial processor is SL5DR, but upon reflection i think it could be blown?
There is a SL4C8 with the same spec on ebay, the seller won't allow a return if it's spec isn't suitable thou. |
|
| Back to top |
|
|
Root
Joined: 11 Mar 2006
Posts: 64
|
| Posted: Wed Jul 19, 2006 9:13 am Post subject: |
|
|
SL5DR cann't be Coppermine-1000.
Look here...
I think that you inserted coppermine with IHS (FC-PGA2 package), which doesn't work in non-Tualatin MoBos  Am I right?
_________________
FreeBSD - forever |
|
| Back to top |
|
|
D.8080
Joined: 03 Apr 2006
Posts: 1474
Location: Italy
|
|
| Back to top |
|
|
|
