| View previous topic :: View next topic |
| Author |
Message |
Wasmachineman_NL
Joined: 04 Jul 2019
Posts: 988
Location: Netherlands
|
 Posted: Wed Oct 04, 2023 4:49 pm Post subject: 4.8 GHz W3690, feasible? |
 |
|
| Short of going chilled water, will my single 360+triple 480 external loop be sufficient to run a W3690 at 4.8 GHz? Board is a P6T7 WS Supercomputer. |
|
| Back to top |
|
 |
ApostolCV
Joined: 26 May 2020
Posts: 207
Location: Ukraine
|
| Posted: Thu Oct 05, 2023 11:09 am Post subject: |
|
|
| On my opinion logical limit to work at point 4.6GHz even with with with good water . 4.2 GHz at good air cooling. |
|
| Back to top |
|
|
svmlegacy
Joined: 15 Jun 2016
Posts: 551
Location: Canada
|
| Posted: Thu Oct 05, 2023 11:34 am Post subject: |
|
|
| There's a good number of W3690 submissions on HWBot for ~ 4.8 GHz under H2O, with very aggressive voltages. I'm not sure how long Gulftown survives under that kind of voltage & power, but it should be relatively doable. |
|
| Back to top |
|
|
Wasmachineman_NL
Joined: 04 Jul 2019
Posts: 988
Location: Netherlands
|
| Posted: Thu Oct 05, 2023 12:28 pm Post subject: |
|
|
| svmlegacy wrote: | | There's a good number of W3690 submissions on HWBot for ~ 4.8 GHz under H2O, with very aggressive voltages. I'm not sure how long Gulftown survives under that kind of voltage & power, but it should be relatively doable. |
buildzoid (lol) said 32 nm is near indestructible so >1.45V shouldn't be too much of a issue if you can keep it cool. |
|
| Back to top |
|
|
|
