| View previous topic :: View next topic |
| Author |
Message |
jonny10123
Joined: 18 Oct 2007 Posts: 1
|
Posted: Thu Oct 18, 2007 8:01 am Post subject: Upgrade Path for a Pentium M 725 |
|
|
Hi all,
From various forums I've heard it's possible to upgrade the CPU in my laptop mobo from my current 1.6 Ghz chip to a 2.0 Ghz chip.
The current chip is a Pentium M 725, and Im wandering what type 2.0Ghz version I can replace it with.
The Intel website says my chip has a 90 nm, B1 (Core Stepping), Micro-FCPGA form factor. As I dont have access to any specs for my motherboard, does anyone know whether I'm restricted to a 2 Ghz version with exactly the same details as these? Or perhaps it doesnt matter the spec of the chip, as long as the form factor is Micro-FCPGA...
Thanks for any help that can be offered.
Jonny |
|
| Back to top |
|
 |
D.8080

Joined: 03 Apr 2006 Posts: 1474 Location: Italy
|
Posted: Thu Oct 18, 2007 9:44 am Post subject: |
|
|
Laptop manufacturer and model.
Download Cpuz, run it and see if it gives more details.
There is a solution to your problem, we just need time. Don't worry.
When you'll be upgrading, take photos of both processors, if we have no pic yet you'll contribute to the site. |
|
| Back to top |
|
 |
D.8080

Joined: 03 Apr 2006 Posts: 1474 Location: Italy
|
Posted: Thu Oct 18, 2007 9:53 am Post subject: |
|
|
Dothan core, info says up to 2.26 ghz.
After posting what I asked for I'll be more specific.
You'll need adequate cooling, the 2 ghz processor is 7 watts higher in power consumption. Be sure and check with your manufacturer if the cooler you have in now is suitable for the 2 ghz cpu. |
|
| Back to top |
|
 |
gshv

Joined: 01 Feb 2003 Posts: 7898 Location: Fairfax, VA USA
|
Posted: Thu Oct 18, 2007 10:05 am Post subject: Re: Upgrade Path for a Pentium M 725 |
|
|
| jonny10123 wrote: | | The Intel website says my chip has a 90 nm, B1 (Core Stepping), Micro-FCPGA form factor. As I dont have access to any specs for my motherboard, does anyone know whether I'm restricted to a 2 Ghz version with exactly the same details as these? Or perhaps it doesnt matter the spec of the chip, as long as the form factor is Micro-FCPGA... |
The chip specs may be important as, for example, your motherboard may not support 533 MHz FSB. Try to find out what FSB is supported by your board.
Gennadiy |
|
| Back to top |
|
 |
|
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|
Powered by phpBB © 2001 phpBB Group
|